Often called "the workhorse of the industry", the Kluge EHD is already a legend. Featuring speeds up to 3,300 impressions per hour, the EHD can accommodate up to 15"x 24.75" (381mm x 629mm) sheets, with up to 40 square inches of die area. Kluge's patented Delayed Dwell technology allows the EHD to start on impression sooner, bottom out, and remain on impression longer doubling impression time with no loss of production speed and assuring flawless foil separation from the stock. A new, optional, freestanding mobile electronics console puts all press operations in one place for easy access. The same console can also serve as a workstation and toolbox.
Rugged, dependable and simple to operate, the EHD is known for providing years of reliable service in foil stamping, embossing and die cutting, and for over 25 years has been the standard by which all presses in its class are measured.
All Kluge presses can be supplied with the electrical specification of your country.
EHD Series English Metric
Platen size 14" x 22" 356 x 559 mm
Minimum sheet size 3" x 3" 76 x 76 mm
Maximum sheet size* 15" x 24.75" 381 x 629 mm
Magazine Capacity 14" 356 mm
Delivery Capacity 14" 356 mm
Air 90 psi @ 10cfm
Stock range Onion Skin to .200" board
Inside Chase Dimensions 14" x 22" 356 x 559 mm
Outside Chase Dimensions 16.25" x 23.5" 413 x 597 mm
Main and Back Shaft Diameter 4.375" 111 mm
Maximum operating speed 3,300 iph
Machine power required 3 h.p., A.C. 230/460 volt, 3 phase, 1800 rpm, 60 cycle
Machine dimensions 74" x 50" x 68" 1880 x 1270 x 1727 mm
Net Weight (approx.) 4400 lbs 1996 kg
Total weight (approx.) 5,000 lbs 2,268 kg
*The Delayed Delivery option increases the maximum sheet height to 17" (and minimum sheet size to 4" x 5") and the Wide Magazine option increases the maximum sheet width to 26.25".
Click here to download the brochure.
Kluge EHD Series
